Kuala Lumpur Malaysia March 2020 Construction Workers Installing Fabricating Timber — Stock Photo, Image
Editorial Use Only

KUALA LUMPUR, MALAYSIA -MARCH 05, 2020: Construction workers installing & fabricating timber formwork at the construction site. The formworks made from timber and plywood. — Stock Editorial Photography

KUALA LUMPUR, MALAYSIA -MARCH 05, 2020: Construction workers installing & fabricating timber formwork at the construction site. The formworks made from timber and plywood.

 — Photo by Aisyaqilumar

Same Series:

MALACCA, MALAYSIA -OCTOBER 13, 2015: Construction workers fabricating steel reinforcement bar at the construction site in Malacca, Malaysia
Malacca Malaysia October 2015 Construction Workers Fabricating Steel Reinforcement Bar — Stock Photo, Image
SELANGOR, MALAYSIA -AUGUST 01, 2016: Group of construction workers pouring wet concrete using concrete bucket into the timber formwork at the construction site.
Selangor Malaysia August 2016 Group Construction Workers Pouring Wet Concrete — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -APRIL 27, 2017: Group of construction workers pouring wet concrete using the concrete hose from the concrete pump into the timber formwork at the construction site.
Kuala Lumpur Malaysia April 2017 Group Construction Workers Pouring Wet — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -AUGUST 23, 2019: Construction workers working at the construction site in Malaysia during the daytime. They are required to wearing appropriate safety gear to avoid an accident.
Kuala Lumpur Malaysia August 2019 Construction Workers Working Construction Site — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -OCTOBER 16, 2017: Construction workers fabricating steel reinforcement bar at the construction site. The reinforcement bar was tied together using tiny wires
Kuala Lumpur Malaysia October 2017 Construction Workers Fabricating Steel Reinforcement — Stock Photo, Image
SEREMBAN, MALAYSIA -MARCH 29, 2020: Construction workers fabricating steel reinforcement bar at the construction site. They tied it together using the tiny wires. It is one of the steps in the making of reinforcement concrete.
Seremban Malaysia March 2020 Construction Workers Fabricating Steel Reinforcement Bar — Stock Photo, Image
MALACCA, MALAYSIA -SEPTEMBER 24, 2016: Construction workers fabricating floor slab reinforcement bar at the construction site in Malacca, Malaysia.
Malacca Malaysia September 2016 Construction Workers Fabricating Floor Slab Reinforcement — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -May 16, 2017: Group of construction workers pouring wet concrete using the concrete hose from the concrete pump into the timber formwork at the construction site.
Kuala Lumpur Malaysia May 2017 Group Construction Workers Pouring Wet — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -OCTOBER 11, 2017: Construction workers creating holes at the concrete wall using powerful mobile drilling machine.
Kuala Lumpur Malaysia October 2017 Construction Workers Creating Holes Concrete — Stock Photo, Image
MALACCA, MALAYSIA -SEPTEMBER 28, 2016: Construction workers fabricating floor slab reinforcement bar at the construction site in Malacca, Malaysia.
Malacca Malaysia September 2016 Construction Workers Fabricating Floor Slab Reinforcement — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -JUNE 27, 2016: Construction workers fabricating steel reinforcement bar at the construction site in. The reinforcement bar was ties together using tiny wire.
Kuala Lumpur Malaysia June 2016 Construction Workers Fabricating Steel Reinforcement — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -MAY 18, 2017: Construction workers leveling wet concrete that poured on floor at the construction site.
Kuala Lumpur Malaysia May 2017 Construction Workers Leveling Wet Concrete — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -APRIL 27, 2017: Group of construction workers pouring wet concrete using the concrete hose from the concrete pump into the timber formwork at the construction site.
Kuala Lumpur Malaysia April 2017 Group Construction Workers Pouring Wet — Stock Photo, Image
MALACCA, MALAYSIA -MARCH 30, 2016: Construction workers fabricating steel reinforcement bar at the construction site in Malacca, Malaysia. The reinforcement bar was ties together using tiny wire.
Malacca Malaysia March 2016 Construction Workers Fabricating Steel Reinforcement Bar — Stock Photo, Image
KUALA LUMPUR, MALAYSIA -AUGUST 15, 2017: Construction workers fabricated timber formwork and reinforcement bar. Formwork made from timber and plywood. Rebar tied using tiny wire.
Kuala Lumpur Malaysia August 2017 Construction Workers Fabricated Timber Formwork — Stock Photo, Image

Usage Information

You can use this royalty-free editorial photo "KUALA LUMPUR, MALAYSIA -MARCH 05, 2020: Construction workers installing & fabricating timber formwork at the construction site. The formworks made from timber and plywood." for personal and non-commercial purposes according to the Standard License. This stock image may be used to illustrate stories in newspaper and magazine articles and blog posts. Please note that editorial stock photos may not be used in advertising or promotional material.

You can buy this editorial photograph and download it in high resolution up to 5060x3795. Upload Date: Aug 23, 2020